|
MecWash aqueous degreaser makes MACH debut alongside proven Aqua-Save waste water disposal efficiency
High quality, aqueous-based component cleaning - including a major MACH debut - and environmentally efficient waste water disposal are both being highlighted on the MecWash Systems' stand No 5645 at MACH 2008.
MecWash component washing system goes through the wall
to maximise pneumatic component cleanliness
High levels of component cleaning performance and an innovative location on site have combined to maximise the benefit of a MecWash Midi component cleaning system for one of the UK's leading manufacturers of pneumatic components. The aqueous-based installation in the Clean Pneumatronic Systems Division of KV Automation in Milton Keynes has replaced the previous cleaning system that saw very complex parts cleaned and dried through the use of potentially harmful solvents. Significantly, a dividing wall also separates the manufacturing area from a large scale clean room allowing the cleaning process to play the optimum role during manufacturing.
MecWash component cleaning technology measures up at Renishaw
Aqueous-based component cleaning technology from MecWash Systems Ltd. is now meeting the extremely high performance standards laid down by one of the world's leading manufacturers of measurement equipment. Four MecWash Midi cleaning stations are now operational for Renishaw and are achieving results that even satisfy Tof SIMS analysis (Time-of-flight secondary ion mass spectrometry) - a highly demanding surface analysis process undertaken at Bristol University. As a result, the 330,000 components per month produced at Renishaw's Stonehouse and Wotton-under-Edge facilities are achieving the high levels of cleanliness required for a range of applications in industries as diverse as medical, forensics, calibration, aerospace and automotive, where Renishaw is seen as a major producer of probing systems and calibration equipment.
Specialist turned parts manufacturer answers 'Solvent emissions directive' with MecWash Aqueous technology
Consistently high levels of component cleaning, dramatic savings in man power requirements and environmental improvements are all key benefits now being enjoyed by one of the UK's leading specialists in turned parts manufacturing following the installation of a MecWash Systems aqueous-based component cleaning station. Rugby-based Davromatic Precision Ltd. now uses a single MecWash Solo, linked to a mobile Aqua-Save waste water processing unit, as a key element in its manufacturing processes with, it says, tangible advantages the result.
MecWash helps Dunlop Equipment Division of Meggitt Aerospace
maximise component quality and environmental performance
The need for component quality and reliability in the aerospace manufacturing industry is second to none, with all stages of production obliged to meet the most stringent standards. It is in this context that one of the industry’s leading specialists, the Dunlop Equipment Division of Meggitt Aerospace, is now benefiting from the use of a MecWash Systems’ aqueous-based component cleaning facility.
Major time savings,
enhanced quality, environmental care
MecWash Systems technology scores on all fronts at MSP
A 75% reduction in component cleaning time, environmental betterment
and more consistent product quality - the benefits now being enjoyed
by leading sub-contract turned parts manufacturer MSP Ltd., through
the use of MecWash Systems Ltd.'s aqueous cleaning technology, are
clear cut.
MecWash re-writes the
rules on aqueous component cleaning
and helps meet the regulations head on
The problems associated with solvent cleaning and degreasing
of metal parts within industry are widely acknowledged. Moreover,
as regulations such as COSHH and SED become ever more stringent,
the restrictions relating to solvent use and the risks presented
both for users and companies alike will unavoidably increase.
MecWash combines ultrasonics
with aqueous wash system to achieve
stringent component cleaning targets
An extremely high level of component cleaning - which exceeds
a target that calls for just one particle of 100 microns in size
per 100 ml of wash down fluid - is now being achieved by one of
the country's leading manufacturers of hydraulic components as a
result of MecWash Systems' technology.
New Cosworth technology
plant gains from high quality
MecWash aqueous cleaning expertise
An extremely high level of component cleaning - which
exceeds a target that calls for just one particle of 100 microns
in size per 100 ml of wash down fluid - is now being achieved by
one of the country's leading manufacturers of hydraulic components
as a result of MecWash Systems' technology.
MecWash uses ultrasonic
component washing
washing technology - to maximum effect
The quality and environmental benefits widely associated
with aqueous component cleaning equipment from MecWash Systems Ltd.
has now taken a further step forward in a move that is of particular
importance to manufacturers of complex machined products. The company's
acclaimed rotational washing system is now available with ultrasonic
cleaning built in to the same unit to provide unprecedented levels
of component cleaning.
MecWash component cleaning
replaces solvents and helps
to deliver formula one performance!
There are few more demanding environments in the automotive
industry than Formula One racing. The leading edge performance that
this entails, in turn, calls for precise, high quality manufacturing
procedures that not only meet today's specifications but which can
also match ever more stringent needs in the future.
MecWash helps Triumph
to maximise 'Rocket' quality
The launch of the new Triumph Rocket III motorcycle has set
new standards in terms of performance and engine size - at almost
2.3 litres, it is the most powerful production bike in the world.
Federal mogul turns
the tide on harmful solvent degreasing
An on-going commitment to environmental betterment by automotive
component manufacturer Federal-Mogul, has now led to the installation
of a MecWash Systems component washing station at the company's
premises in Rochdale.
Goodrich replaces solvents
with MecWash cleaning systems to resolve
Health and Safety and environmental issues
High quality component cleaning and a clear endorsement of the
move towards environmental improvement are the key benefits associated
with the use of MecWash parts cleaning equipment by one of the country's
leading aerospace component manufacturing organisations.
Cleanliness, production
efficiency and environmental protection - All enhanced by MecWash
Millennium component cleaning system at IMI Norgen
The first installation of a MecWash Millennium parts washing
machine has now proven itself as central to the cleaning processes
at one of the world's leading pneumatic component manufacturers.
The unit is used intensively within one of the dedicated "focus"
facilities at IMI Norgren's Lichfield plant.
|
